Continuous Flow

The continuous flow of work is vital for the successful implementation of Lean. In this section, you will learn the fundamentals required to achieve it.

Introduction

An important part of keeping your clients loyal is to deliver the right value at the right time to them. Looking for a way to achieve this, in the middle of the 20th century, Toyota developed a method called “continuous flow”. It is an alternative to the commonly accepted way of batching work when managing a process.

In this section, you will be able to learn how to make the most of continuous flow by implementing some of the methods Lean has to offer.

What Is Continuous Flow?

Continuous flow is a Lean method that allows you to move a single product through every step of your process instead of grouping work items into batches. The method is called this way because it allows you to continuously send goods to market. This provides you with the opportunity to deliver value more often to your customers.

continuous_flow_stock

It is as simple as it sounds. Once you start working on a product, you keep focused on it until it is ready to be delivered to your customer.

At first, the concept of continuous flow may sound less efficient than processing work in batches because, with it, you are delivering smaller amounts of value to the market at a time. However, it actually allows you to provide value to customers more often and reduce the time they spend waiting to receive their order.

In addition, it is a fantastic way to minimize the waste of your process. Continuous flow is especially useful for reducing inventory costs and the wait time of your work items.

What Is Takt Time?

In order to make the most of continuous flow, you need to define a takt time for your assignments.

Takt time is the rate at which a product needs to be completed in order to meet customer demand. The term originates from the German word “takt”, which literally means “pulse” or “beat”.

Briefly explained, your takt time is your sell rate.

For example, if your company has a takt time of 2 days, then you need to finish producing a product every 2 days because on average a customer is buying your product every 2 days.

You can calculate takt time by dividing the total available time for production by the required units of production.

Often confused with cycle time, takt time is one of the most important metrics for maintaining a continuous flow. It allows you to utilize your capacity in the best possible way to meet customer demand.

Learn more about Takt Time

What Is Heijunka?

To help you optimize your workflow continuously for takt time, Lean offers a solution for production leveling called Heijunka.

As demand is rarely steady, you need to adapt your process to any fluctuations. Heijunka is a method for reducing the unevenness (Mura) of your process and preventing overburden (Muri). It means “leveling” and is critical for maintaining a stable Lean system.

Heijunka allows you to produce intermediate goods at a steady rate so that you can satisfy fluctuations according to your average customer demand. For that purpose the method has two ways of leveling production:

  1. Leveling by volume
  2. Leveling by type

Leveling by volume

In its pure form, Lean teaches us to pull work only when there is a demand for it, or in other words, when it is requested by customers. However, in some industries processing work this way is not practical when there is a constant stream of new orders. Irrelevant of your industry, it is highly unlikely to receive an equal amount of orders each day or even week or month.

To achieve a continuous flow of work, Heijunka provides you with the opportunity to level your production volume depending on the average demand.

So if you receive 10 orders per week on average but their number is fluctuating by the day (e.g. Monday 5; Tuesday 1; Wednesday 2, etc.), you just need to adjust your capacity to meet the average demand. In a continuous flow, this would mean producing 2 products per day (in case of a 5-day work week) to meet demand.

Leveling by type

When you are producing a portfolio of products and distributing capacity according to demand, things can be quite tricky. Facing this issue, Toyota found a way to ensure a steady workflow that meets customers’ demand by implementing a Heijunka box.

Heijunka_box
Heijunka box

Basically, it is a system that visualizes the demand for each product and according to the average demand it levels a production sequence for achieving an optimal flow.

*We will be releasing an in-depth article covering Heijunka soon. Stay tuned.

What Is Jidoka?

Meeting demand is important, delivering a product with an unquestionable value is even more so. This is where Jidoka comes in. It is a method for ensuring a built-in quality of a product. Also known as “autonomation”, Jidoka allows you to stop the production process as soon as you see an imperfection.

It has 4 distinctive steps:

  1. Discover an abnormality
  2. Stop the production process
  3. Fix the immediate problem
  4. Investigate and correct root cause

Although it may temporarily disturb the continuous flow of your process, implementing Jidoka will help you ensure that the product you are delivering meets the quality expectations of your customers.

*We will be releasing an in-depth article covering Jidoka soon. Stay tuned.

Continuous flow is an important part of Lean management and Lean product development in particular. By optimizing your work process in order to deliver the right value at the right time to your customers, you will be more likely to ensure their loyalty and grow your business.

STEP 1

What is Takt Time?

Read more

What is Takt Time

Looking for a Kanban Solution?

Invite your team for a 30-day free trial, with access to all of our features, and almost no limits. By signing up, you agree to our Privacy Policy.